Ships from our USA and CANADA stock — no extra duties or import fees for US and Canadian customers
Ships from our USA and CANADA stock — no extra duties or import fees for US and Canadian customers
To locate the BCM remove the right knee bolster this is on the right bottom of the dash The Pro Bypass will connect to the BCM plugs There are 6 plugs on the body control module we need C1 and…
Locate the BCM as follows The BODY CONTROL MODULE is under the dash left side above the parking brake pedal area. To get to it, remove the 10mm bolt that holds the parking brake release lever to the trim. Remove…
The factory security functions are managed by the Body Control Module (BCM) where we need to make the connections. The BCM is located behind the radio. Starting at the bottom, pull to disengage the trim bezel clips. Disconnect the electrical…
We need to locate the BCM under the driverside of the dash We need plug C1 which is Light Green
Locate the BCM Remove the right console trim panel The BCM is located behind this cover we just need access to the plugs We need 2 plugs to connect the pro bypass the pictures below give the pin numbers of…
To locate the BCM: Remove the right console trim panel The BCM is located behind this cover we just need access to the plugs We need 3 plugs to connect the pro bypass the pictures below give the pin numbers…
The factory security functions are managed by the Body Control Module (BCM) where we need to make the connections. The BCM is located by the radio. Some times the radio will need remove but most odf the time you can…
Locate the BCM There are 6 electrical connectors on the BCM (C1, C2, C3, C4, C5, C6) The connectors we need are C2 which is grey and C3 which is brown and C4 which is light blue. All 3 have…
To locate the BCM, remove the trim panel in front of the passengers door next to the passengers right foot: Ensure the ignition switch is in the OFF position. Remove the right front hinge pillar trim panel We need connector…
To locate the BCM remove the right knee bolster this is on the right bottom of the dash The Pro Bypass will connect to the BCM plugs There are 6 plugs on the body control module we need C2 –…
Locate the BCM The BCM is in the dash directly under the steering column. Remove the Trim panel. Then behind that is the BCM. Disconnect the Lt Blue connector first. There are 6 electrical connectors on the BCM (C1, C2,…
Locate the BCM and install the PRO Bypass Module The BCM is behind and above the radio. Remove the radio and the heater control out to gain access to the Body Control Module. here are 3 electrical connectors on the…
The BCM is under the dash, far left above the parking brake pedal. There are 3 electrical connectors on the BCM (C1 24 pin pink, C2 24 pin grey, C3 16 pin grey) This view is looking into the end that…
The Body Control Module (BCM) is under the left side of the dash. There are 3 connectors for the BCM. C1 is Purple, we don’t need this one. C2 is Light Blue, we need this one. C3 is Brown and…
Locate the BCM The BCM is in the dash directly under the steering column. Remove the Trim panel. Then behind that is the BCM. Disconnect the Brown connector first. There are 3 electrical connectors on the BCM (C1, C2, C3)…
Locate the BCM and install the PRO Bypass Module The BCM is under the drivers side of the dash. Remove the screws from the DLC Plug. REmove the screws that hold the sound insulator. Remove the connectors from the module.…
Locate the TDM and install the PRO Bypass NOTE: In this vehicle the TDM is NOT VISIBLE, it can only be reached with the hand and taken off its bracket that holds it with clips. The TDM (or passlock control…
Locate the EVO Module and Install the PRO Bypass The EVO Passlock Module is under the center of the dash under the Ashtray. • Remove the knee bolster screws. • Unsnap the knee bolster. • Twist the brake release cable…
The Theft module surrounds the ignition cylinder. We need to get at the harness to find the correct wires for the connections. At the end, the Theft module will stay plugged in with one wire cut. 3. Unsnap the IP…
How to reach the TDM and install the PRO Full Bypass Remove the right side instrument panel insulator. Remove the instrument panel compartment. Remove the theft deterrent module (TDM) bracket mounting bolts (2). Remove the theft deterrent module bracket from the…
The security system is managed by the EVO/Passlock module located on the right side of the Instrument Cluster, behind the air-duct. 5. Disconnect the electrical connector (1) from the EVO/Passlock module (2)
How to reach the BCM and install the NEWROCKIES Passlock Bypass Location of the BCM is under the right side of the dash by the blower motor. You will need to remove the black panel above the passengers feet to…
Locate the BCM and install the PRO Full Bypass The TDM is embedded in the Body Control Module (BCM). The BCM is in the RIGHT kick panel. There are 3 electrical connectors on the BCM (C1, C2, C3) Connector C1…
How to reach the ECM and bypass the GM Passkey 2 System This instructions are for Installing the NEWROCKIES PRO Module to bypass the PassKEY 2 Security System at the ECM. If you would like to install it at the…
How to reach the TDM and install the VATS Passkey Bypass This instructions are for Installing the NEWROCKIES PRO Module VATS / PassKEY Full Bypass at the TDM. If you would like to install it at the ECM, please refer…
Option 1: Installation at TDM The TDM (Theft Deterrent Module) is above and left of the brake pedal under the dash
The TDM is under the right side of the dash (passenger side, behind glove box). It is up in there, backwards on a bracket. Remove the Glove Box, Then remove the Bolts that hold the Theft deterrent module bracket from…
How to reach the TDM and install the VATS Passkey Bypass This instructions are for Installing the NEWROCKIES PRO Module VATS / PassKEY Full Bypass at the TDM. If you would like to install it at the ECM, please refer…
Alternative ECM direct wiring: This instructions are for Installing the NEWROCKIES PRO Module VATS / PassKEY Full Bypass at the ECM. If you would like to install it at the TDM, please refer to: Installation at TDM. You can install…
The CCM is the module that manages the security and can be found behind the center of the Instrument Panel Cluster. Disconnect harness connectors from the CCM. On the CCM there are 2 connectors (C1, C2).
How to reach the CCM and install the NEWROCKIES PassKEY 2 Bypass The CCM is the module that manages the security and can be found under the center portion of the dash.
Alternative ECM direct wiring: This instructions are for Installing the NEWROCKIES PRO Module VATS / PassKEY Full Bypass at the ECM. If you would like to install it at the TDM, please refer to: Installation at TDM. At the Theft…
How to reach the TDM and install the VATS Passkey Bypass This instructions are for Installing the NEWROCKIES PRO Module VATS / PassKEY Full Bypass at the TDM. If you would like to install it at the ECM, please refer…
The TDM (VATS Module) can be found under the right side of the dash. Unplug the TDM and leave it unplugged, the PRO module replaces the TDM.
The TDM module is under the right side of the dash (NOTE: In the 1982 the TDM is behind the seat, under the rear hatch on the left side on the bulk head) Unplug the TDM and leave it unplugged,…
Locate the BCM as follows: We need connector x1 and x3 X3 PLUG X1 PLUG
The Pro Module is to be installed at the Body Control Module. The BCM is attached to the fuse block under the second row seat on the drivers side. We need to use wires from the 2 main connectors, first…