2000-2003 Pontiac Grand Prix
How to reach the TDM and install the PRO Full Bypass The TDM is around the ignition cylinder so we will have to splice in at the base of the steering column, connector C201. – The Connector C201 is under the steering column, #4 below.
1998-1999 Chevrolet Venture, Pontiac Montana, Oldsmobile Silhouette
The Theft module surrounds the ignition cylinder. We need to get at the harness to find the correct wires for the connections. At the end, the Theft module will stay plugged in with one wire cut. 3. Unsnap the IP courtesy lamp from the IP insulator. 4. Remove the IP insulator from the instrument panel. […]
1998-1999 Chevrolet Monte Carlo, 1998-2001 Lumina
How to reach the TDM and install the PRO Full Bypass Remove the right side instrument panel insulator. Remove the instrument panel compartment. Remove the theft deterrent module (TDM) bracket mounting bolts (2). Remove the theft deterrent module bracket from the cross car beam (4). Remove the theft deterrent module mounting bolts from the bracket (3). […]
1997-1999 Pontiac Grand Prix
The connections to be made on the Grand Prix are at the Body Control Module. The Body Control Module is under the dash, left side by the parking brake pedal. Remove the left instrument panel insulator. Refer to Instrument Panel Insulator. Disconnect the BCM electrical connectors. There are only 2 connectors. First is the nature […]
1997 Oldsmobile Silhouette
The Theft module is intergral to the Body Control Module so we need to splice into the Body Control Module connectors. The Body Control Module is under the dash, far right. Connector C1 Connector C2
1996-2002 Pontiac TransAm, Firebird, Chevrolet Camaro (Installation at PCM/ECM)
How to reach the ECM and bypass the GM Passkey 2 System This instructions are for Installing the NEWROCKIES PRO Module to bypass the PassKEY 2 Security System at the ECM. If you would like to install it at the BCM, please refer to: Installation at BCM. If you don’t have the BCM (i.e. project/race […]
1996-2002 Pontiac TransAm, Firebird, Chevrolet Camaro (Installation at BCM)
How to reach the TDM and install the VATS Passkey Bypass This instructions are for Installing the NEWROCKIES PRO Module VATS / PassKEY Full Bypass at the TDM. If you would like to install it at the ECM, please refer to: Installation at ECM. The TDM is embedded in the BCM, so all connections are […]
1996-1999 Saturn S Series
To install the pro bypass module we will need to access the RKE module behind the right rear side seat attached to the in-structure 1.1. Disengage seat cushion by pushing rearward, then upward at 2 front retaining locations to release the rear cushion from the retainer. 1.2. Slide the cushion from under the seat back […]
1996-1999 Pontiac Bonneville
Directions to install the NEWROCKIES VATS Full Bypass Step 1 – Neutral Safety Switch Connector (PNP Switch) First you will need to locate the plug at the Neutral Safety Switch (also called park range selector switch or PNP Switch). The Neutral Safety Switch is located under the hood on the rear left side of the engine […]
1995-1999 Buick Riviera & Oldsmobile Aurora
TDM location and how to install the NEWROCKIES Full VATS Bypass The module is under the right side of the dash. Remove the right kick panel and move the DERM to the side. The theft module is there. TDM Connector
