Ships from our USA and CANADA stock — no extra duties or import fees for US and Canadian customers
Ships from our USA and CANADA stock — no extra duties or import fees for US and Canadian customers
The PRO bypass module needs to be connected at the IPC connectors Location of the Instrument Panel Cluster (IPC) There are 2 electrical connectors on the IPC (C1,and C2 ) The C1 is a 22 pin connector as in the…
The PRO bypass module needs to be connected at the IPC connectors Location of the Instrument Panel Cluster (IPC) There are 2 electrical connectors on the IPC (C1 and C2 ) The C1 is a 24 pin connector as in…
The factory security functions are managed by the Body Control Module (BCM) where we need to make the connections. The BCM is located behind the radio. Starting at the bottom, pull to disengage the trim bezel clips. Disconnect the electrical…
The factory security functions are managed by the Body Control Module (BCM) where we need to make the connections. The BCM is located by the radio. Some times the radio will need remove but most odf the time you can…
Locate the BCM There are 6 electrical connectors on the BCM (C1, C2, C3, C4, C5, C6) The connectors we need are C2 which is grey and C3 which is brown and C4 which is light blue. All 3 have…
Locate the BCM and install the PRO Bypass Module The BCM is under the cluster and above the steering column. The knee bolster must come off, much of the trim on the dash and the cluster must come out to…
To locate the BCM remove the right knee bolster this is on the right bottom of the dash The Pro Bypass will connect to the BCM plugs There are 6 plugs on the body control module we need C2 –…
Locate the BCM The BCM is in the dash directly under the steering column. Remove the Trim panel. Then behind that is the BCM. Disconnect the Lt Blue connector first. There are 6 electrical connectors on the BCM (C1, C2,…
Locate the BCM and install the PRO Bypass Module The BCM is under the cluster and above the steering column. The knee bolster must come off, much of the trim on the dash and the cluster must come out to…
The BCM is under the dash, far left above the parking brake pedal. Remove the left instrument panel (IP) insulator. Disconnect the BCM electrical connectors. There are 4 electrical connectors on the BCM and we need to connect to 3 of them:…
The BCM is is under the left side of the dash There are 4 electrical connectors on the BCM we need (C1 BLUE, C2 PURPLE) C2 Connector Purple C1 Connector blue
Locate the BCM and install the PRO Full Bypass The BCM is mounted on the top of the glove box. There are 4 electrical connectors on the BCM. Body Control Module J2
Locate the BCM and install the PRO Bypass Module The BCM is behind and above the radio. Remove the radio and the heater control out to gain access to the Body Control Module. here are 3 electrical connectors on the…
The BCM is under the dash, far left above the parking brake pedal. There are 3 electrical connectors on the BCM (C1 24 pin pink, C2 24 pin grey, C3 16 pin grey) This view is looking into the end that…
The Body Control Module (BCM) is under the left side of the dash. There are 3 connectors for the BCM. C1 is Purple, we don’t need this one. C2 is Light Blue, we need this one. C3 is Brown and…
Locate the BCM and install the PRO Full Bypass The BCM is mounted on the top of the dash under the pad. 1. Disable the SIR system by taking the battery cables off. Notice: Be careful not to damage the VIN…
The BCM is is under the left side of the dash There are 4 electrical connectors on the BCM we need (C1 BLUE, C2 Purple) C2 Connector Purple C1 Connector blue
Locate the BCM The BCM is in the dash directly under the steering column. Remove the Trim panel. Then behind that is the BCM. Disconnect the Brown connector first. There are 3 electrical connectors on the BCM (C1, C2, C3)…
Locate the BCM and install the PRO Bypass Module The BCM is under the drivers side of the dash. Remove the screws from the DLC Plug. REmove the screws that hold the sound insulator. Remove the connectors from the module.…
Locate the TDM and install the PRO Bypass NOTE: In this vehicle the TDM is NOT VISIBLE, it can only be reached with the hand and taken off its bracket that holds it with clips. The TDM (or passlock control…
Locate the EVO Module and Install the PRO Bypass The EVO Passlock Module is under the center of the dash under the Ashtray. • Remove the knee bolster screws. • Unsnap the knee bolster. • Twist the brake release cable…
Locate the BCM and install the PRO Bypass module. The BCM is is under the left side of the dash. Remove the 3 retainers and remove the hush panel or it is also called the sound insulator. Then unplug the…
The security system is managed by the EVO/Passlock module located on the right side of the Instrument Cluster, behind the air-duct. 5. Disconnect the electrical connector (1) from the EVO/Passlock module (2)
How to reach the BCM and install the NEWROCKIES Passlock Bypass Location of the BCM is under the right side of the dash by the blower motor. You will need to remove the black panel above the passengers feet to…
Locate the BCM and install the PRO Full Bypass The TDM is embedded in the Body Control Module (BCM). The BCM is in the RIGHT kick panel. There are 3 electrical connectors on the BCM (C1, C2, C3) Connector C1…
The factory security functions are managed by the Body Control Module (BCM) where we need to make the connections. The BCM is located behind the radio. Set the park brake. Move the shifter to the neutral position. Starting at the…
The Pro Module is to be installed at the Body Control Module. The BCM is attached to the fuse block under the second row seat on the drivers side. We need to use wires from the 2 main connectors, first…