How to reach the TDM and install the VATS Passkey Bypass
This instructions are for Installing the NEWROCKIES PRO Module VATS / PassKEY Full Bypass at the TDM. If you would like to install it at the ECM, please refer to: Installation at ECM.
The TDM is embedded in the BCM, so all connections are on the BCM. The BCM is under the right side of the dash. Remove the sound insulator then you can get it at the BCM connectors.

And the BCM is here.

The BCM has 3 connectors, 2 smaller ones, C1 and C2, then a larger Blue one, C3, where all the connections will be made.

Disconnect the Battery. Unplug the Blue connector, C3, Cut the yellow/black on pin C11 and the Dark Blue on pin D8 and tape these out of the way coming from the BCM.